
Wintime (R) Utility Disk
Copyright (C) Wintime Technology Inc. 1988-1995.

Directories and files list for your utility disk as follows:

           \ACAD

           \WINDOWS\README
           \WINDOWS\DGWINTIM.DLL

Description
===========

      * File \WINDOWS\README
        The file you are reading.

      * File \WINDOWS\DGWINTIM.DLL
        Tablet driver for Windows AutoCAD R13.

Introduction
============

     before "DGWINTIM.DLL" driver is issued, PC user should use mouse as
   system cursor to open AutoCAD for WINDOWS program. Then digitizer can
   be used as cursor in AutoCAD operation. With  "DGWINTIM.DLL"  driver,
   Tablet as cursor input device in R13 & Windows could be possible.  In
   addition to initial point function, this driver provides more feature
   like pickup, mole etc.

1. Driver features

   1.1. Driver let digitizer operate as "Digitizer"

        This driver let user can use R13 template as well as  the  other
        digitizer driver can do. User can pickup macro key  direct  from
        digitizer.

   1.2. Driver can operate as "MOLE"

        User can define "MOLE" area , and cursor in "MOLE" area acts  as
        system cursor.

   1.3. Driver can act as system cursor by one click.

        User can define one button as toggle button to toggle system cur-
        sor and R13 cursor by one click.

   1.4. Drive can automatically toggle system/R13

        This driver automatically detects operator's AutoCAD command  to
        change tablet as system cursor or R13 cursor input device.

installation
============

   Copy DGWINTIM.DLL to R13 for Windows DRV directory.
     Ex. copy DGWINTIM.DLL \R13\DRV

Configuration
=============

   1. In R13 command line type config. press return key.
   2. Press return key.
   3. Select 4 for configure digitizer. press return key.
   4. Select Wintime Driver. press return key.
   5. Please press "Y" or "N" for mole area.
        4.5.1. if you press "Y", It shows "Please click your  lower  left
               mole area". Then select and click. And  it  shows  "Please
               click your upper right mole area". Then select and click.

   6. Please press "Y" or "N" for toggle button.
        4.6.1  if you press "Y", please select one button  except  button
               one.

Note
====

     This driver is version 1.0, adn must use wttablet.drv 3.31 for windows
   system.


End of file.
